Wotofo x SMM COG MTL 22mm RTA

Designed in collaboration between Wotofo and Suck My Mod, the Wotofo x SMM COG MTL 22mm RTA features a 3mL refillable PCTG tank capacity, 5-level MTL-style airflow control ring, and single coil dual post build deck. Constructed from durable 304 stain..

  • Ex Tax: $34.99
  • Product Code: M00002358
  • Availability: In Stock
$34.99

Available Options

Designed in collaboration between Wotofo and Suck My Mod, the Wotofo x SMM COG MTL 22mm RTA features a 3mL refillable PCTG tank capacity, 5-level MTL-style airflow control ring, and single coil dual post build deck. Constructed from durable 304 stainless steel, the COG MTL RTA can hold up to 3mL within the PCTG tank capacity, refillable via top fill system. Within the Wotofo COG RTA sits a single coil dual post build deck, featuring two posts with a clamp style system fastened at the top by Phillips screws. At the base is a single hole MTL-style airflow control system with 5 different settings, allowing MTL users to find the best airflow setting for the preference. Rotating the airflow causes a cog gear within to match airflow settings to provide a fine-tuned experience.

Wotofo x SMM COG MTL 22mm RTA Features:
Collaboration between Wotofo and Suck My Mod
22mm Diameter
3mL Juice Capacity
PCTG Tank Reinforcement
Superior 304 Stainless Steel Construction
Top Fill System
Dual Post Build Deck - Clamp System
Top Secured via Phillips Screws
Single Coil Configuration
PEEK Insulator
Geared Bottom Airflow Adjustment System - 5 MTL Options
Airflow Ventilated from Side to Bottom of Coil
Geared for Nicotine Salts and Freebase eJuice
510 Delrin Drip Tip
Threaded 510 Connection
Available in Black, SS, Gunmetal, Blue, Gold, and Rainbow

Includes:
1 Wotofo COG MTL RTA
1 0.8ohm Dual Core Fused Clapton Coil
1 1.2ohm Single Strand Coil
2 2.5mm Cotton Strips
1 Phillips Screwdriver
1 User Manual
1 Bag of O-Rings

Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.

Write a review

Note: HTML is not translated!
    Bad           Good